2012. november 15., csütörtök

HDTV screen calculation basics explained

This article is intended to give you the quick formulas to calculate all interesting measures from the diagonal size of your screen optionally walking you through the calculus with the lease possible pain. (hopefully :)
Let me know if you are interested in other calculations as well, and I will update this article when I find the time!

Quick formulas for 16:9 screens

w=0.8716 * d
h=0.4903 * d
a=0.4273 * d^2
Maximum distance from your eye to the screen to be able to see all the details displayed:
mh = 0.4358 * d / tan(hres / 120°)
mv = 0.2451 * d / tan(vres / 120°)
whichever is shorter.


Please note, that the viewable screen size is rarely equal to the size used in the marketing :) You shall use whatever specs your screen has. Both of my screens are w:h = 16:9.
  1. My new 50” (127cm) Panasonic Viera P50UT50E, native resolution: hres:vres = 1920:1080 pixels (full-HD, the usual resolution of blu-ray movies)
    d=49.9” (126.7cm) is viewable
    w=43.5" (110.5cm)
    h=24.5" (62.1cm)
    a=1064 square inch (6864.4cm2)
    mh=75.8" (192.6cm)

    mv=77.2" (196.2cm) -> visible horizontal and vertical resolution about the same
  2. My old 32” (81,3cm) JVC AV-32H40 CRT, native resolution: 720 * 576 pixels (PAL SDTV, the usual resolution of PAL DVDs)
    d=29.9” (75.9cm) is viewable
    w=26" (66.2cm)
    h=14.7" (37.2cm)

    a=382 square inch (2464.6cm2)mh=124" (314.9cm)
    mv=87.3" (221.7cm) -> visible vertical resolution is a lot better, makes you have to move closer
And the surprising information here is: stepping up from a 32" screen to an 50" one can earn you almost three (2,79) times as large of a screen area to watch! (Being full-HD it also has 2 megapixel native resolution compared to the 0.4 megapixel of the SDTV / DVD - that is quite an upgrade too :)

Stop here, if you don't care to know why. :)

Diagonal size and aspect ratio

The only information we need to know to start is the diagonal size (d) of your screen and the aspect ratio (width to height, w:h) of it:
  • nowadays usually 16:9
  • the old ones being 4:3
  • screens made for computers are often 16:10
  • and there are some 21:9 models out there. These are the ones best suited to watch movies see my upcoming post about how much better these are for movies and worse for TV shows! :)

Quick formulas for screens with other aspects

Please replace 16 and 9 with the aspect numbers for your screen:
w=16 * sqrt(d^2 / (16^2 + 9^2) )
h=9 * sqrt(d^2 / (16^2 + 9^2) )
a = 16*9 / (16^2 + 9^2) * d^2

Width and height from diagonal

We know how the diagonal of a square screen relates to its width and height:
w^2 + h^2 = d^2
Let’s define an unknown x knowing the relative ratio of the width and height of your screen:
w=16 * x
and height:
h=9 * x
Use the aspect numbers of your own screen!

Now we substitute, so that we only have one unknown value to find out (we know d):
(16 * x)^2 + (h=9 * x)^2 = d^2
which is the same as:
256 * x^2 + 81 * x^2 = d^2
which is the same as:
337 * x^2 = d^2
which is the same as:
x^2 = d^2 / 337
which is the same as:
x = sqrt(d^2 / 337) (sqrt means "square root of")
This means that width and height both can be calculated from the diagonal.
w=16 * sqrt(d^2 / 337)
and height:
h=9 * sqrt(d^2 / 337)

Area from diagonal

We know how to calculate the area of the screen from its width and height:
a = w * h
We will substitute widht and height, know that we have the formulas for them:
a = 16 * sqrt(d^2 / 337) * 9 * sqrt(d^2 / 337)
Which is the same as:
a = 144 / 337 * d^2

Maximum viewing distance

According to the information I have found on Internet the smallest bit on a picture an average human eye can distinguish from another is one the size of a minute of arc: 1' (one degree of arc: 1° contains 60 minutes of arc: 60', the full circle is 360° which is 21600').
It is expressed this way, so that it does not matter how far that visible bit is. For example you may see the fly on the glass of your window in the same size as a building behind it in a distance, if they cover the same area of your visible field.
We refer to the maximum distance here as the where you cannot move any farther if you still want to see all the details that are displayed on your screen, supposing you actually use the full resolution of your screen. Some important points here:
  1. I suppose you are watching content on your screen, which does not have a smaller resolution than your screen. Watching a DVD film on a full HD screen will not really deliver you more details, since those are not recorded on the DVD.
  2. Some people might have better vision, some might have worse, this calculation is for the average.
  3. Some might argue, that even if you cannot see the difference between adjacent pixels, because they seem so small they still might look more "pleasing" to the eye. I do not care about such arguments. :)
  4. 3D TV-s indeed seem to need some further considerations. I will delve into that as soon as I find the time.
  5. We will not consider the minor difference in the visible size of a pixel in the center and on the edge of the screen. (the one on the edge is physically the same size, but is further from your eye, since the screen does not form a circle around your eye, thus it seems smaller)
 We can calculate this maximum distance from the data we already know: the width of the screen and the horizontal resolution or the height of the screen and the vertical resolution. The resolution is in turn the minimum number of minutes of arc we want to see, or else we just couldn't tell apart some separate pixels.
We will use the right-angled triangle between your eye, the center of the screen and either the top or the left edge of the screen.
  • There is a right angle in it at the center of the screen (there should be for optiam viewing experience anyhow :).
  • The lenght of the base of the triangle (between the center and the edge of the screen) is either half of the width or half of the height of the screen.
  • Its height is the distance between your eye and the screen, what we want to find out. :)
  • The angle at your eye is half the horizontal or vertical resolution (the other half covers the right or bottom half of the sceen).
 The tangent trigonometric function for an angle in a right triangle is:
tan(angle) = (lenght of the opposite side) / (lenght of the adjacent side)
but this is the same as:
(lenght of the adjacent side) = (lenght of the opposite side) / tan(angle)
so Maximum distance from your eye to the screen:
m = (half screen width) / tan(half horizontal resolution/60 degrees)
m = (half screen height) / tan(half vertical resolution/60 degrees)
whichever is shorter.

Rendszeres olvasók